SPX Power Team- Inflatable  Jacks

Power Team Banner
Inflatable Jacks

BE SAFE!
 
 •INSPECT BEFORE AND AFTER EACH USE.


 •REPLACE IF ANY SIGNS OF DEGRADATION OR WEAR THAT MAY AFFECT SAFETY OR PERFORMANCE.


 •KEEP THE PRODUCT CLEAN.


 •STORE PROPERLY.

Inflatable Jack Cross Section

Inflatable Jacks

Models IJ Series (1 - 74 Ton)
Power Team

Order Codes:

IJ13T | IJ45T | IJ66T | IJ119T | IJ2211T | IJ3615T | IJ4516T | IJ7520T

Flexible, Space Age jacking capabilities. The non skid reinforced inflatable jack is perfect for many applications

Inflateable Jack Applications
Inflatable Jack Positions
Inflatable Jack Table of Properties

•Highly flexible and lightweight jacks only require an air supply of 8 bar (116 psi) maximum. Water or non-explosive gas can also be used for inflation.
•Un-inflated jacks are less than 25 mm (1 in.) thick, making lifting tasks in small spaces seem routine.
•Constructed of non-conducting, high quality rubber material with multi-layer aramid fiber reinforcement.
•Samples of jacks are pressure tested to 20 bar and cycle tested (10,000 inflate / deflate cycles at 8 bar for 10,000 inflate / deflate cycles).
•The controller, shut-off and air hoses are all equipped with an industrial interchange style quick disconnect air coupler. Female half coupler bodies have a locking collar to help the operator avoid accidentally disconnecting the jack while under load.  
•The top and bottom surface of the jack has a skid resistant, interlocking pattern to assist in alignment of two jacks being used together.
•Single jack controller with "dead man" control (part number 350090) can be used individually or in multiples to regulate the number of jacks desired.
•Heavy attachment handles are provided on the two largest jacks for attachment of a rope or hook to help in positioning the jack.
•Inflation hose system is color-coded (red and blue) for easy recognition when using more than one jack.
•The jacks can be used at ambient temperatures of -20°C (-4°F) to + 50°C (+ 122°F).

Lifting Height x Capacity IJ13T - IJ119T
Lifting Height x Capacity IJ2211T - IJ7520T
Assemblies
Couplings for Inflatable Jack
Accessories for Inflatable Jack

250343 Female quick coupler. 1/4" industrial interchange x 1/8" NPT female. 0.1

250353 Male quick coupler. 1/4" industrial interchange x 1/8" NPT male. 0.1

250682 Female quick coupler. 1/4" industrial interchange x 1/4" NPT male. 0.1

15235 Connector 1/8" NPT male x 1/4" NPT female. 0.1

250341 Female quick coupler. 1/4" industrial x 3/8" I.D. hose. 0.5

250342 Male Quick coupler. 3/8" I.D. Hose. 0.1

350209 Air hose. Same as 350208, except blue in color. 6.0

307159 Pressure reducing valve. Allows use of bottled gases to operate jacks (works on CGA-580 Nitrogen/ Argon/Helium bottles). Contains standard bottle fitting on inlet and 1/4" industrial interchange (female) outlet. 4.0

350090 Air controller for single jack. Equipped with relief valve and pressure gauge. 1.9

350207 Shut-off hose with shut-off valve and pressure relief valve. Includes a female and male quick coupler. 0.7

350208 Air hose. Red, 30’ long. Includes No. 250341 female and No. 250342 male quick coupler. 6.0

More from MacScott Bond:

 

MacScott Bond Ltd is a member of the MacTaggart Scott Group. The Loanhead Division, certified to ISO9001: 2008 and OHSAS 18001:2007, has a full design, manufacture, installation, service and repair capability for pneumatic, oil or water hydraulic and cooling systems. We sell hydraulic, pneumatic and associated components and are distributors for SPX, Globe, Atlas Copco, SPX Power Team, MP Filtri, ACE controls and more.


Please feel free to contact our sales team or one of our engineers for more information about how MacScott Bond can help you.

 

Tel: 0131 448 2950  |   enquiries@macscott.com  |  Fax: 0131 448 2941

ISO 9001 Quality System MacScott Bond
OHSAS 18001 Occupational Health and Safety System MacScott Bond