We have available on the shelf all the modular motor, brake and control valve options, foot brackets Filter Regulator Lubricators and silencers. The motor speed controls are relatively inexpensive and the equipment is also rated to ATEX directive 2014/34/EU,
Group II Category 2 G D cT5
MacScott Bond holds in stock a large selection of parts for the RM range. If you need to replace something let us know. Please find parts lists in the datasheets below as reference.
All information as supplied by SPX Hydraulic Technologies.
Scales have been adjusted to enable bar and psi to be read from a common curve. Therefore
only read psi with the left hand axis and bar with the right hand axis.
Motor performance can be derived from the above graphs as in the examples shown.
Where motors are not required to start under load, such as fan drives, selection may be made using either Graph 1 or Graph 3 using the required running torque or power only. For applications where the motor starts under load, such as hoists, winches or track drives, the starting torque in Graph 2 must also be considered. Starting torque varies between the maximum and minimum values shown, depending on the angular position of the output shaft.
The RM210 motor has a four cylinder radial piston design with oil bath lubrication and is designed to develop greater power than other motors of equivalent size weighing 26kg (57.3lbs).
The motors are rated to ATEX directive 2014/34/EU, Group II Category 2 G D c T5
Moment of Inertia of rotating parts 1.9 lb.in² / 56gm² (motor only)
Max Overhung Force on motor shaft 200 lbf. / 890 N
Temperature Range -4°F to +176°F / -20°C to +80°C
Lubricating Oil Capacities - Horizontal 330ml / 10.5 fl.oz.. Vertical 450ml/ 15.5 fl.oz. Use a good quality hydraulic oil with a viscosity of around 100cSt (460SSU) at 40° C / 104° F.
Airline Filtration and Lubrication - Use a 64 micron filtration or better. Choose a lubricator suitable for the flow required. Prior to initial start-up, inject oil into the inlet port. Lubricator drop rate: 3-4 drops/minute continuous operation. Lubrication drop rate 6-10 drop/minute intermittent operation.
Can't find what you are looking for? Give us a call or an email and find out how MacScott Bond can help.
MacScott Bond Ltd is a member of the MacTaggart Scott Group. The Loanhead Division, certified to ISO9001: 2008 and OHSAS 18001:2007, has a full design, manufacture, installation, service and repair capability for pneumatic, oil or water hydraulic and cooling systems. We sell hydraulic, pneumatic and associated components and are distributors for SPX, Globe, Atlas Copco, SPX Power Team, MP Filtri, ACE controls and more.
Please feel free to contact our sales team or one of our engineers for more information about how MacScott Bond can help you.