MacScott Bond can provide spare parts. If you need to replace something pleaselet us know.
Polar Moment of Inertia 30 lb.ins2 (8.8 g.m2).
Max Overhung Force on motor shaft 400lbf (1750N) Axial loads should be kept to a minimum. Consult MacScott Bond Ltd.
Temperature Range -4°F to +176°F / -20°C to +80°C
Some motors are capable of running oil free. Please ask MacScott Bond Ltd for more details.
Airline Filtration and Lubrication - Use a 64 micron filtration or better. Choose a lubricator suitable for the flow required. Prior to initial start-up, inject oil into the inlet port. Lubricator drop rate: 8-10 drops/minute continuous operation. Lubrication drop rate 14-16 drop/minute intermittent operation.
All information as supplied by Globe.
Scales have been adjusted to enable bar and psi to be read from a common curve. Therefore
only read psi with the left hand axis and bar with the right hand axis.
Motor performance can be derived from the above graphs as in the examples shown.
Where motors are not required to start under load, such as fan drives, selection may be made using either Graph 1 or Graph 3 using the required running torque or power only. For applications where the motor starts under load, such as hoists, winches or track drives, the starting torque in Graph 2 must also be considered. Starting torque varies between the maximum and minimum values shown, depending on the angular position of the output shaft.
The Globe Vane motors are most suitable for light duties and higher speed operations and can be supplied direct coupled to gearboxes.
A variety of operating conditions can be achieved by utilisation of pressure regulators and flow control valves.
The V10 weighs approximately 21kg (46lbs) - 27kg (58lbs) depending on mounting .
The motors are rated to ATEX directive 2014/34/EU, Group II Category 2 G D c T5
Can't find what you are looking for? Give us a call or an email and find out how MacScott Bond can help.
MacScott Bond Ltd is a member of the MacTaggart Scott Group. The Loanhead Division, certified to ISO9001: 2008 and OHSAS 18001:2007, has a full design, manufacture, installation, service and repair capability for pneumatic, oil or water hydraulic and cooling systems. We sell hydraulic, pneumatic and associated components and are distributors for SPX, Globe, Atlas Copco, SPX Power Team, MP Filtri, ACE controls and more.
Please feel free to contact our sales team or one of our engineers for more information about how MacScott Bond can help you.