Home > Products > Power Team Hydraulic Tools > Workshop Presses

SPX Power Team - Workshop Presses

Power Team Banner

10 Ton

SP10 Workshop Press 10 Ton

H Frame Workshop Press

Model: SPM10 (10 Ton Press)
Power Team
Order Codes:

Bench Frame: SPM1010 (Hand)

Floor Frame: SPH1010 (Hand) | SPE1010 (Electric)| SP1010A (Air)| SPE1010D (Electric)

These 10 Ton Power Team Bench or Floor H Frames are available from MacScott Bond. A single speed hand pump (P55), electric hydraulic (PE172-E220 or PE174-E220) or air operated hydraulic (PA9H) pump can be used to power the press. Ordering using one of the Frame codes above will ensure that the appropriate pump and cylinder are included. Hydraulic gauges, hoses and fittings also included.

25 Ton

SPM256C Workshop Press 25 Ton C Frame

C Frame Workshop Press

Model: SPM256C (25 Ton Press)
Power Team
Order Codes:

Press: SPM256C

Pedestal Base: 60846 (not included in SPM256C)

This 25 Ton C Frame workshop press can be bench mounted or on an optional pedestal base. Operated with the P59 two speed hydraulic hand pump and a C256C hydraulic cylinder (included in SPM256C ordering code).

SP25 Workshop Press 25 Ton

H Frame "Open Throat" and "Economy" Press

Model: SP25 (25 Ton Press)
Power Team
Order Codes:

“Open Throat”: SPA2514 (Air) | SPM2514 (Hand) | SPE2514 (Electric) | SPE2514S (Electric) | SPE2514DS (Electric)

“Economy”: SPA256 (Air) | SPM256 (Hand) | SPE256 (Electric) |

These Power Team 25 Ton presses are available in “Open Throat” (can be used as H Frame and C Frame) and “Economy” (rugged and reasonably priced) models . A hand pump (P159/P59), electric hydraulic (PE172-E220 or PE174S-E220) or air operated hydraulic (PA6) pump can be used to power the press. Ordering using one of the codes above will ensure that the appropriate pump and cylinder are included. Hydraulic gauges, hoses and fittings also included.

55 Ton

SP55 Workshop Press 55 Ton

H Frame Workshop Press

Model: SP55 (55 Ton Press)
Power Team
Order Codes:

SP55: SPA556 (Air) | SPM556 (Hand) | SPM5513 (Hand) | SPE556 (Electric) | SPE5513 (Electric) | SPE5513S (Electric) | SPE5513D (Electric) | SPE5513DS (Electric)

These Power Team 55 Ton H frame presses are available from MacScott Bond. A hand pump (P159/P460), electric hydraulic (PE172-E220, PE172S-E220, PE174-E220 or PE554S-E220) or air operated hydraulic (PA6) pump can be used to power the press. Ordering using one of the codes above will ensure that the appropriate pump and cylinder are included. Hydraulic gauges, hoses and fittings also included.

Code: SF50 - Straightening fixtures for use with 55-ton or 80-ton Roll-Bed® presses (2 ea.) – (Not part of press, order separately)

100 Ton

SP100 Workshop Press 100 Ton

H Frame Workshop Press

Model: SP100 (100 Ton Press)
Power Team
Order Codes:

SP100: SPM10010 (Hand) | SPE10010 (Electric) | SPE10010R (Electric) | SPE10013DS (Electric)

These Power Team 100 Ton H frame presses are available from MacScott Bond. A hand pump (P460) or electric hydraulic (PE552-E220, PE172-E220 or PQ1204S-E380) pump can be used to power the press. Ordering using one of the codes above will ensure that the appropriate pump and cylinder are included. Hydraulic gauges, hoses and fittings also included.

Order Code: SF150 : Straightening fixtures for use with 100-ton workshop press and 100-, 150- and 200-ton Roll-Bed® presses (2 ea.) – Not part of press, order separately

150-200 Ton

SP150-200 Workshop Press 150 - 200 Ton

H Frame Workshop Presses

Model: SP150-200 (150 - 200 Ton Presses)
Power Team
Order Codes:

150 Ton: SPE15013DS (Electric)

200 Ton: SPE20013DS (Electric)

These Power Team H frame presses are available with 150 and 200 Ton capacity from MacScott Bond. An electric hydraulic pump (PQ1204S-E380) is used to power these presses. Ordering using one of the codes above will ensure that the appropriate pump and cylinder are included. Hydraulic gauges, hoses and fittings also included.

Roll-Bed Press (80-200 Ton)

RB Series Roll-Bed Workshop Press 80 - 200 Ton

Roll-Bed® Workshop Presses

Model: RB Series (80-200 Ton H Frame Presses)
Power Team
Order Codes:

80 Ton: RB8013S (Electric)

100 Ton: RB10013S (Electric)

150 Ton: RB15013S (Electric)

200 Ton: RB20013S (Electric)

These Power Team Roll-Bed® H frame presses are available with 80, 100, 150 and 200 Ton capacity from MacScott Bond. An electric hydraulic pump (PQ1204S-E380) is used to power these presses. Ordering using one of the codes above will ensure that the appropriate pump and cylinder are included. Hydraulic gauges, hoses and fittings also included.

Heavy-Duty Straightening Fixtures:

SF50 : Straightening fixtures for use with 80-ton Roll-Bed® presses (2 ea.) – Not part of press, order separately

SF150 : Straightening fixtures for use with 100-, 150- and 200-ton Roll-Bed® presses (2 ea.) – Not part of press, order separately

Workshop Press Accessories Kit

Workshop Press Accessories

Press Accessories Kit

Kits: SPA
Power Team
Order Codes:

10 Ton: SPA10 | 25 Ton: SPA25 | 55 Ton: SPA55 | 80/100 Ton: SPA100 | 150/200 Ton: SPA200

Make your Power Team press even more versatile with one of the accessory sets above. For more accessories, not included in these, such as The Rubber Tire Removing/ Installing set, please take a look at the datasheet and contact MacScott Bond for a quote.

Related Equipment:

 
 

MacScott Bond Ltd is a member of the MacTaggart Scott Group. The Loanhead Division, certified to ISO9001: 2008 and OHSAS 18001:2007, has a full design, manufacture, installation, service and repair capability for pneumatic, oil or water hydraulic and cooling systems. We sell hydraulic, pneumatic and associated components and are distributors for SPX, Globe, Atlas Copco, SPX Power Team, MP Filtri, ACE controls and more.


Please feel free to contact our sales team or one of our engineers for more information about how MacScott Bond can help you.

 

Tel: 0131 448 2950  |   enquiries@macscott.com  |  Fax: 0131 448 2941

ISO 9001 Quality System MacScott Bond
OHSAS 18001 Occupational Health and Safety System MacScott Bond