Home > Products > Motion Control > Automation Control > Damping Pads
Tailor made damping material in pad format: SLAB damping pads are made of a viscoelastic PUR-material. They absorb impact loads effectively and are also suitable for insulating or damping vibration.
The SLAB series SL-030 to SL-300 can be adapted to the relevant type of application. This can be achieved through working with ACE controls and MacScott Bond's engineers to find the right configuration for your requirements. This is possible because the standard SLAB material can be cut exactly and quickly to any customer requirement with ACE controls' new cutting system. Samples are available to find the best solution.
The SLAB damping pads are proven to provide impact and collision protection. They have beenused on luggage and transport belts, conveyor systems, pneumatic, electromechanical and hydraulic drives as well as on linear carriages.
SL-030-12
Energy capacity:
27.4 in-lbs/Cycle to
168.2 in-lbs/Cycle
Stroke: 0.26 in
SL-030-25
Energy capacity:
59.3 in-lbs/Cycle to
371.7 in-lbs/Cycle
Stroke: 0.49 in
SL-100-12
Energy capacity:
132.8 in-lbs/Cycle to
531.0 in-lbs/Cycle
Stroke: 0.26 in
SL-100-25
Energy capacity:
177.0 in-lbs/Cycle to
557.6 in-lbs/Cycle
Stroke: 0.49 in
SL-300-12
Energy capacity:
336.3 in-lbs/Cycle to
1,070.9 in-lbs/Cycle
Stroke: 0.26 in
SL-300-25
Energy capacity:
522.2 in-lbs/Cycle to
1,858.7 in-lbs/Cycle
Stroke: 0.49 in
Damping Pads
The SLAB series of damping pads from ACE controls provides the solution to effectively slowing down loads that impact over large and small surfaces.
They have been used in a wide range of applications where damping technologies are required to help with oscillation or damaging impacts in designs especially where the loads are to be slowed over a large surface.
These damping pads are available to choose in any size. They absorb static loads from 2 to 30 psi and can either be cut to size or designed as a molded part.
Simply use an adhesive to install. The standard pad heights are between 0.5 and 1 inch. The pads are available with different coatings and can be used in a temperature range from -5°c to 50°c .
All ACE controls CAD data is available online here.
MacScott Bond Ltd is a member of the MacTaggart Scott Group. The Loanhead Division, certified to ISO9001: 2008 and OHSAS 18001:2007, has a full design, manufacture, installation, service and repair capability for pneumatic, oil or water hydraulic and cooling systems. We sell hydraulic, pneumatic and associated components and are distributors for SPX, Globe, Atlas Copco, SPX Power Team, MP Filtri, ACE controls and more.
Please feel free to contact our sales team or one of our engineers for more information about how MacScott Bond can help you.